How is it Safe to Use a Laser Cutting Machine?(1)
September 30,2022
With the increasing use of laser cutting machines, some families have also added laser cutting machines as DIY tools at home. But for new technology products, many people do not have a set of real safety rules in mind. How is it safe to use a laser cutting machine?
Formulate and comply with equipment operation procedures
- Formulate and strictly follow the operating procedures of the equipment.
- Before starting the machine, check the safety facilities of the system, especially the switch of the shutter.
- Maintain the machine in time.
The site must be equipped with fire extinguishers
The laser cutting machine shall be equipped with fire extinguishers and other fire protection devices. The operators shall understand the layout and master the use methods.
Manage the position of the laser cutting machine in a dangerous area
The area where the equipment is located shall be safely demarcated as a hazardous area, which shall be enclosed with a telescopic isolation belt, and the laser leaked outside the hazardous area shall be guaranteed to be below the Class I achievable emission limit.
Warning signs shall be set up at the entrance and exit of the dangerous area, including:
- Invisible laser radiation
- Class IV laser products
- Laser cutting machine power
- No outsiders
- Pay attention to eye protection
It is strictly forbidden to operate after fatigue and drinking
The use of laser processing equipment, such as laser cutting machines, has a great risk, and if you are careless, it is very likely to cause injury. Therefore, it is strictly prohibited to operate the laser cutting machine after fatigue and drinking.
Never look directly at the laser beam
The laser beam wavelength of the laser cutting machine is 0.98μM (980 nm), located in the infrared radiation range of the spectrum, which is invisible light. Because it is invisible, it is easy to be ignored and may cause damage to the eyes. Never look directly at the light path!
It is forbidden to open the laser hood during operation
It is forbidden to open the laser hood during the operation of the laser.
It is forbidden to open the protective door of the closed optical fiber laser cutting machine during the whole operation process.
It is forbidden to wear metal articles for maintenance
It is forbidden to repair or adjust the laser without maintenance qualification.
When repairing or adjusting the laser, it is strictly forbidden to wear metal ornaments or objects (such as rings, bracelets, watches, earrings, metal belt buckles, etc.). Otherwise, an electric shock may be caused.
The maintenance and adjustment of laser and photoconductive systems are extremely dangerous. To prevent accidents, separate maintenance operation is prohibited, and "two persons shall go together".
Searching for more information about small size laser cutting machine Manufacturer, Wholesale small laser cutting machine, cnc laser cutting machine supplier, welcome to contact us at any time.