Inkjet Printer Sublimation Ink Saving Tips

June 01,2022

sublimation ink for t shirt printing,best printer for sublimation printing,inkjet printer vs sublimation printer

 

For users who use compatible inkjet printer sublimation ink or add inkjet printer sublimation ink, there are several suggestions to keep in mind:

 

ink

 

  1. ensure that the nozzle of the supplemented ink cartridge is in good condition;

 

  1. it is better to add ink with high-quality original inkjet printer sublimation ink;

 

  1. before refilling ink, the ink cartridge should be thoroughly cleaned, otherwise the mixing of two different inks is likely to cause a chemical reaction, resulting in plug and other failures. Cleaning the ink cartridge with the built-in software can only solve the slight plug. It is best to inject water into the ink cartridge with a syringe before adding ink. Try not to let the water overflow. Then hold the ink cartridge by hand and shake it gently to make the remaining ink fully dissolved in the added water.

 

If you use too much force when shaking, the water inside may overflow. At this time, you should immediately wipe it with a paper towel or cloth to prevent it from penetrating the chip and causing hardware failure. Continue to use a syringe to drain the mixed liquid in the ink cartridge. Repeat this operation several times until the extracted liquid is very light in color;

 

  1. when filling the ink cartridge, the inkjet printer sublimation ink amount shall be properly controlled and not too much;

 

  1. to prevent the ink cartridge from drying and blocking due to exposure to the air for a long time, although there is a method to clean it, the ink should be filled immediately after the ink cartridge is about to finish. If the printer is not used for a short time, the ink cartridge can also be placed in a special ink cartridge storage box. The rubber pad inside can block the air and keep the nozzle moist;

 

  1. after filling the ink cartridge, it is best to let the ink cartridge stand for a few minutes so that the inkjet printer sublimation ink can slowly soak the sponge to ensure the printing quality;

 

  1. if it is an integrated ink cartridge (the ink cartridge has a nozzle), the nozzle on the ink cartridge must not be damaged when adding ink to the ink cartridge. Otherwise, the nozzle will be damaged and the ink cartridge will be damaged.

 

  1. during the use of the ink cartridge, the nozzle may be blocked by paper fibers, resulting in poor printing effects. Therefore, regular cleaning of the nozzle is essential. When cleaning the nozzle, gently clean the edge of the nozzle with a wet paper towel and noncotton paper towel without touching the nozzle. You can also use the cleaning button on the control panel of the inkjet printer until the printing effect is clear.

 

We are an sublimation ink for t shirt printing,best printer for sublimation printing,inkjet printer vs sublimation printer, our products satisfy our customers. And we want to be your long-term partner, any interests, welcome to contact us.

SHARE US: