dye sublimation fabric printer for sale,eco solvent printer manufacturers china,inkjet printer for sublimation printing

Paper sticking problem

Generally, two or more sheets of paper are fed at a time, causing the printer to fail to eat normally and then shut down.

This problem is generally caused by two reasons. One is that the paper is damp. This problem can be better solved by baking the paper and placing it on the radiator or monitor, but it must not take too long. Second, most of the paper bought from the store is just taken out of the box, and the extrusion time is long, forming a whole, which is prone to this phenomenon. The solution is to hold the two ends of the paper in both hands and rub them back and forth before loading it into the printer so that each paper can move so that one end of the paper forms a neat slope. In this way, the slope is lowered into the carton, so that there will be no paper sticking.

Paper jam problem

Many times, a paper jam is caused by improper use. When a paper jam occurs, turn off the printer first, and then decide whether to pull out the paper from the outside or the inside according to the paper jam. Be very careful at this time to prevent the paper from being left inside the printer.

To avoid paper jams in the printer, it is necessary to pay attention to the following aspects: before printing, it is best to check whether the printer panel or the paper feed slot is equipped with a "paper size selector" switch. If so, select A4 or letter according to the media size used, so that the paper is not easy to skew and cause a paper jam when entering; The thickness of the paper should not be too thin or too thick; When adding paper to the paper feed slot, be sure to take out the original paper first, and then put it back into the paper feed slot together with the newly added paper, to avoid paper jam caused by drawing multiple sheets of paper at a time when the printer is printing; Whether the paper is scattered before being put into the paper slot when adding paper. This method is to prevent the paper from sticking together due to humidity or other factors, resulting in multiple sheets of paper being involved together during paper feeding and paper jam.

No paper feed problem

Generally, the paper feeding wheel rustles when you hear it, that is, you can't eat the paper, which causes the computer to prompt the printer to stop printing due to lack of paper. It is believed that many users have encountered such problems. I also encountered this phenomenon.

The main reason for this problem is that the room is too dry. When the paper is dry, the friction between the paper feed wheel and the paper will be weakened, so that the paper cannot be fed. The only way to solve this problem is to increase the humidity of the room, but we must master it well, otherwise, it will cause the previous problem. In addition, special attention should be paid not to let the printer close to the radiator, let alone let the electric heater directly face the printer, especially the quartz tube direct type electric heater, which will not only cause the problem of no paper feeding but also dry the inkjet head, resulting in the inability to print.

We are the dye sublimation fabric printer for sale,eco solvent printer manufacturers china,inkjet printer for sublimation printing, if you need sublimation paper inkjet printer, epson high quality inkjet printer, plz feel free to contact us.